IPV6 Deep-Dive

What you'll learn
IPv6 Address
IPv6 Address Simplification Rules
IPv6 Address Types
IPv6 Multicast Address
IPv6 Unicast Address Types - Unspecified and Loopback
IPv6 Unicast Address Types - Unique Local Address
IPv6 Unicast Address Types - Link Local Address
IPv6 Unicast Address Types - Global Unicast Address
IPv6 Unicast Address Types - GUA Subnet Prefix
IPv6 Unicast Address Types - Embedded IPv4
IPv6 Global Unicast Address Manual Configuration
IPv6 Unicast Routing
IPv6 Dynamic Address Assignment - SLAAC
IPv6 Router Address Assignment with SLAAC
IPv6 - Path MTU Discovery (PMTUD)
IPv6 - Dual Stack Migration Strategy
IPv6 - Tunneling - MCT with Static Routing
IPv6 - Tunneling - MCT with Dynamic Routing
IPv6 - Tunneling - GRE
IPv6 - Tunneling - Automatic 6to4 ( Private Address )
IPv6 - Tunneling - Automatic 6to4 ( Public Address )
IPv6 - Tunneling - ISATAP
IPv6 - NAT64 Introduction
IPv6 - Static NAT64
IPv6 - NAT64 with DNS64
IPv6 - IPv6 Deployment Models
IPv6 - IPv6 and IPv4 Characteristics
IPv6 - IPv6 Enhancements over IPv4

Requirements
CCNA

Description
Internet Protocol version 6 (IPv6) is the most recent version of the Internet Protocol (IP), the communications protocol that provides an identification and location system for computers on networks and routes traffic across the Internet. IPv6 was developed by the Internet Engineering Task Force (IETF) to deal with the long-anticipated problem of IPv4 address exhaustion, and is intended to replace IPv4. In December 1998, IPv6 became a Draft Standard for the IETF, which subsequently ratified it as an Internet Standard on 14 July 2017.

Devices on the Internet are assigned a unique IP address for identification and location definition. With the rapid growth of the Internet after commercialization in the 1990s, it became evident that far more addresses would be needed to connect devices than the IPv4 address space had available. By 1998, the IETF had formalized the successor protocol. IPv6 uses 128-bit addresses, theoretically allowing 2128, or approximately 3.4×1038 total addresses. The actual number is slightly smaller, as multiple ranges are reserved for special use or completely excluded from use. The two protocols are not designed to be interoperable, and thus direct communication between them is impossible, complicating the move to IPv6. However, several transition mechanisms have been devised to rectify this.

IPv6 provides other technical benefits in addition to a larger addressing space. In particular, it permits hierarchical address allocation methods that facilitate route aggregation across the Internet, and thus limit the expansion of routing tables. The use of multicast addressing is expanded and simplified, and provides additional optimization for the delivery of services. Device mobility, security, and configuration aspects have been considered in the design of the protocol.

Who this course is for
Network Engineers

Welcome to My Blog - Check it Every Days
If you have any troubles with downloading, PM me
Please Buy Premium Account from my links to get high download speed and support me
Happy Learning!!