2 Courses in 1 : Learn IOT with ESP8266 and ESP32 Cam module

Two in one. Learn about ESP8266 and ESP32 Camera module. Make lots of projects using these modules

What you'll learn
You will learn everything about NODEMCU and ESP32 CAM development board.
You will learn everything about Arduino IDE.
You will learn to make projects with ESP32 CAM
You will learn how to use controller as wifi Accesspoint and wifi Client.
You will learn separately ADC and PWM of NODEMCU.
You will learn how to add webserver to your project.
You will learn to Face and eye detection using ESP32 CAM
You will learn how to use and add Blynk IOT platform to your project.
Also you will learn how to use and add Thingspeak IOT platform to your project.
You will learn some important IOT protocols.
you will learn about IFTTT protocol in detail.

Requirements
Interest on IOT.

Description
About this course

This course is fully practical oriented.

It covers all basic IOT platforms and all important protocols like MQTT, IFTTT, SMTP and etc.

Every sections has quiz. Questions are related to content of that particular section

Also some sections has projects that helps to improve skills.

This course is based on NODEMCU module.

Apparatus I used

I have used some basic electronics components in this course, like LED, Push button, LM35, Vibration sensor, Gas sensor, Sound sensor and etc.

If you don't have these components, don't worry. I will demonstrate everything.

What will you learn section by section

On section 1 we will discuss on introduction to NODEMCU and how to use Arduino ide for this course.

On second section I elaborated the basic programming experiments with NODEMCU.

on third, I will teach more about ADC and PWM of NODEMCU with experiments.

Next section covers wifi related actions like acces point, wifi scan and connection with board.

On fifth section I will teach you how to interface Blynk IOT platform to your project with some experiments and one project.

Next sixth section covers about Thingspeak IOT platform with some experiments and one project.

On seventh section I elaborated the important protocols in IOT.

On eighth section I will tech you to the IFTTT platform to add your projects. In this section I taught 2 advanced experiments, you can learn easily.

Course outcome

After this course you can confidently make projects with NODEMCU.

You can IOT platforms to your project like Blynk and Thingspeak.

You can use several sensors for IOT projects as I used in this course.

You are now a basic IOT developer.

Second course!!!!!!!!!!!

Esp32 Cam module

About this course

welcome to this amazing project oriented course. this course is all about ESP32 CAM module. through this course you can make your own projects using this module. What ever needed to make projects is explained in this course.

First of all this course is fully practical oriented. This course covers all the basics of ESP32 CAM module and Arduino software which is used to program the ESP32 CAM module. also i explained about the FTDI module.

Why this ESP32 CAM ?

you may seen all the IOT courses. those are made with ESP8266 and ESP32. using these device we can only do some advanced things. also it is concerned in this course, because without these devices we cant learn basics. but, these device do not have camera and SD card features. this is advantage of this module over ESP8266 and ESP32.

What we can do with ESP32 CAM ?

Using this camera feature, we can create projects like spycam, security system, door lock system based on face recognition, and etc. we can do projects wherever need face recognition for example: face recognition based attendance system. also we can recognise eye, text, objects and so on. And using SD card feature, we can save taken images and videos. we do not need to bother about storage.

Devices and software's i used in this course

ESP32 CAM MODULE and FTDI programmer module

For programming i used Arduino software, thats it.

what will you learn by section by section

On first section, I explained about the hardware(ESP32 CAM), software, and programming connection with FTDI programmer. Also i explained how to program with Arduino uno board.

In second section, I taught how to make your own live video streaming with local IP address and ESP32 CAM.

In third section, you will learn about the Blynk IOT platform and how to make live video streaming with blynk IOT platform.

In Fourth section, I will teach you all about the SD card feature and how to use it with your projects. And i explained how to store image taken by ESP32 CAM module in SD card.

In Fifth section, this is an exciting section. in this i taught about the face and eye recognition using python. And i explained this through the Face and Eye recognition project.

In sixth section, i taught about the SMTP server. And how to use it with ESP32 CAM. here, I explained with the project named as how to send email notification with image attachments( Image taken with ESP32 CAM ).

In seventh and eighth sections you will learn to make telegram alert with image and take photo with Blynk IOT.

Ninth section consist all the codes and details.

After this course what you can do

After this course completion you can create your own security for your home security system. Also you would be learnt about Blynk and some IOT platforms. like other IOT courses, you will be learn basic IOT developer things.

See some of the industries started to use ESP32 boards. so as a techy learning about these boards is essential. that is the esssence of this course. Thank you

Who this course is for
Anyone with interest in IOT.

Welcome to My Blog - Check it Every Days
If you have any troubles with downloading, PM me
Please Buy Premium Account from my links to get high download speed and support me
Happy Learning!!