Construction Calc Pro v6.54

Aggregate:
• Inputs: Width, Length, Thickness, Density, Wastage
• Outputs: Estimate Weight, Volume

Asphalt:
• Inputs: Width, Length, Thickness
• Outputs: Estimate Weight, Volume

Balusters:
• Inputs: Run length, Baluster width, Baluster spacing
• Outputs: Qty of balusters, Qty spaces, Baluster spacing (center-to-center), Baluster spacing (edge-to-edge), Measurements to far side of each baluster

Board / lineal foot:
• Inputs: Thickness, Width, Length, Quantity
• Outputs: Board feet, Lineal feet

Concrete - rectangle:
• Inputs: Width, Length, Thickness, Use rebar option, Rebar spacing along width, Rebar spacing along length
• Outputs: Estimate Volume, 60lb premixed bags, 80lb premixed bags, 10kg premixed bags, 25kg premixed bags, 50kg premixed bags, Rebar required

Crown moulding:
• Inputs: Wall angle (corner of wall), Crown (spring) angle
• Outputs: Miter angle, Bevel angle

Drop ceiling:
• Inputs: Length at ceiling, Width at ceiling, Tile size, Distance (anchor to drop ceiling)
• Outputs: Estimate Ceiling area, Ceiling tiles, Perimeter moulding, Main supports, Tee support peices, Wire length (each), Wire length (total), Wire anchors

Drywall:
• Inputs: Room width, Room length, Room height, Panel width, Panel height, Include ceiling option
• Outputs: Estimate Area - surface area. Materials - Drywall panels. Joint compounds - Readymixed, Lightweight readymixed, Setting-type, Lightweight setting-type. Fastener - Drywall nails, Drywall screws. Additional items: Joint tape, Primer, Adhesive

Flooring:
• Inputs: Width, Length, Wastage, Square Ft or M per box
• Outputs: Total area, Boxes needed

Insulation:
• Inputs: Total area width, Total area length, Batt/roll width, Batt/roll length
• Outputs: Batts/rolls required, Total area

Linear cost estimator:
• Inputs: Single panel length, Qty of panels, Cost per linear foot, Cost per linear meter
• Outputs: Total cost, Total length

PAINT:
Inputs: Wall length, Wall height, Number of coats, Surface type
Outputs: Estimate Gallons required, Liters required

Rafter:
• Inputs: Run, Pitch (/12")
• Outputs: Rafter length

Rise/run/angle:
• Inputs: Rise, Run, Angle (Enter rise and either run or angle)
• Outputs: Angle, slope, Run

Roofing:
• Inputs: Width, Length, Pitch, Sq ft or M per pack, Type, Nails, Safety margin
• Outputs: Roof surface area, Packs needed, Nails

SQ cost estimator:
• Inputs: Width, Length, Cost per Sq ft or M
• Outputs: Total cost, Total area, Total area (acres)

Squaring (3-4-5):
• Inputs: Width, Length
• Outputs: Diagonal

Stairs:
• Inputs: Total rise, Custom rise, Custom run
• Outputs: Riser height, Total risers, Tread run, Total treads, Total run, Stringer board length, Elevation, Running stringer points

Tiles:
• Inputs: Room width, Room length, Tile width, Tile length, Use border tiles option, Border tile width, Border tile length, Tile pattern, Safety margin
• Outputs: Estimate Tiles needed, Border tiles needed

6.54
Minor bug fixes.